在镇江地区从事铝艺大门、安全防护栏研发、设计、生产、安装一条龙服务

福徳正神

注册 > 行业资讯 > 铝艺护栏

福徳正神

2018-05-20 18:05:47 福徳正神 阅读

镇江铝艺护栏在安装之前需要先制作,制作铝艺栏杆必须根据现场放线实测的数据,根据设计的要求,绘制施工放样详图,尤其对围栏的拐点位置和铝艺的立柱,定位尺寸要格外注意,才外,福徳正神还要注意三点:

一、切割和安装是否符合工艺。

二、检查预围栏连接是否齐全、牢固。

三、是否选择合格的原材料。

安装时要记住,只有经过现场放线核实后放详图,才能作为围栏构配件的钣金加工图。

The aluminum barrier in Zhenjiang needs to be made before the installation. It must be made according to the measured data of the field line. According to the requirements of the design, we should draw the detailed drawing of the construction. In particular, we should pay special attention to the position of the inflexion point of the fence, the column of the aluminum art and the location size, only three points should be paid attention to.

1. Whether or not the cutting and installation are in line with the process.

Two, check whether the pre fence connection is complete and solid.

Three. Whether or not a qualified raw material is selected.

When installing, we must remember that only after the on-site discharge is verified, can the detail drawings be taken as the processing map of the fence accessories.


标签:&nbsp&nbsp&nbsp铝艺大门&nbsp镇江铝艺大门